Massive Jobs Vacancies at Wire-Teks International Company Limited Nigeria 2013- (11 Positions)

Wire-Teks International Company Limited is a Nigerian based company with specialist interest in the field of Energy, Engineering, Environmental, Transportation and
Logistics Services.

The company also engages in the procurement and supply of electrical, technical, and/or products related to the above field in order to meet
the needs of our esteem clients and prospective customers both in Rivers State, Nigeria in general and West African at Large.

Backed by our expatriates, technical partners Wire-teks has actually been equipped with practical experience in the above field for more than 19 years and have made name for itself in the Nigerian power supply and electrification sector.

Wire-Teks is recruiting to fill the following positions of:

      JOB /   POSITION                          REQUIREMNTS
1) Site Superintendent

Qualification: Minimum of Bsc /  B.Eng in Engineering or its equivalent.

 Experience: Minimum of 10 years in Oil and Gas surface facilites as a Construcion or Project or Site Superintendent. Acquaitance with international standards: API, ASTM, ASME, IEC, BS, IEEE, IP Codes, NEC, NACE, ISO, etc.
Good knowledge of HSE – HSE Management Sysytem, work permit system, risk assessment, safety talks, incident analysis etc
Ability to coordinate & lead mulitiple discilinary teams of E& I, QA/QC, Civil, Piping, Mechanical, and Safety supervisors.
Good knowledge of inspection & control of mechanical, piping Civil, E&I works
Good knowledge of precomm & commissioning activities
Ability to monitor & drive the overall progress of contractors on site to ensure Projects are completed and handed over on schedule.
APPLY HERE
2) Site Supervisor -

 Piping and Mechanical

Qualification: Minimum of Bsc /  B.Eng in Engineering or its equivalent.
Experience: Minimum of 5 years in Oil and Gas surface facilites as a Piping, Mechanical, Construction or Project  Site Supervisor. Acquaitance with international standards: API, ASTM, ASME, BS, ISO. Good knowledge of QA/QC documentation and HSE -  work permit system, risk assessment, safety talks, incident analysis etc
Good knowledge inspection and control dimension of structure steel, piping, equipment and supports during fabrication and installation.
Ability to implement schedule, execute, project procedure and ensure that all deliverables are completed on time, comply to quality standard in accordance with project schedules
Ability to supervise and control the resources of piping / structural fabrication, inspection, testing, installation and commissioning.
Ability to to establish and maintain a good working relationship with the Contractor’s personnel and to provide positive input to methods and solutions for improvement
APPLY HERE
3) Site Supervisor – Civil

Qualification: Minimum of Bsc /  B.Eng in Civil or Building Engineering  or its equivalent

Experience: Minimum of 5 years in Oil and Gas environment as Site Supervisor.
Good knowledge of QA/QC documentation and HSE -  work permit system, risk assessment, safety talks, incident analysis etc
Implement schedule, execute, project procedure and ensure that all deliverables are completed on time, comply to quality standard in accordance with the project schedules
Supervision and control / monitors of contractors’work execution to ensure compliance with scope, design, specifications, drawings, quality and planning.
Ability to establish and maintain a good working relationship with the Contractor’s personnel and to provide positive input to methods and solutions for improvement
APPLY HERE
4) Site Supervisor-E & I

Qualification: Minimum of Bsc /  B.Eng in Electrical Engineering Instrumentation   or its equivalent

Experience: Minimum of 5 years in Oil and Gas surface as a Construction or Project or Site Supervisor.
Good knowledge of HSE -  work permit system, risk assessment, safety talks, incident analysis etc
Acquaitance with international standards: API, ASTM, ASME, IEC, BS, IEEE, IP Codes, NEC, NACE, ISO, etc.
Good knowledge of QA/QC documentation and review of Engineering documentation.
Ability to inspect, regulate, control and documentation and procured E & I / systems materials and equipment.
APPLY HERE

5) Construction Engineer

Qualification: Minimum of Bsc /  B.Eng in Mechanical Engineering or its equivalent

Experience: Minimum of 5 years in Oil and Gas surface facilites as a Piping, Mechanical, Construction or Project Engineer.

Acquaitance with international standards: API, ASTM, ASME,  BS, ISO.
Good knowledge in technical – commercial aspects of tendering and contracting
Good knowledge in technical – commercial aspects of tendering and contracting
Good knowledge of QA/QC documentation and HSE – work permit system, risk assessment, incident analysis etc
Ability to implement schedule, execute, projectprocedure and ensure that all deliverables are completed on time and comply with quality standard in accordance with the project schedules.
Experience in follow-up of material procurement and preparing construction cost estimates for projects.
Ability to supervise site installation works and review all as built documents.
Good knowledge of inspection and control dimension of structure steel, piping, equipment and supports during fabrication and installation.
APPLY HERE

6) Civil Engineer

Qualification: Minimum of Bsc /  B.Eng in Civil Engineering or its equivalent

Experience: Minimum of 5 years in Oil and Gas environment as a Civil Engineer.

Acquaitance with international standards: ASTM, ACI, British / Euro Standards (BS/EN), AASHTO etc
Good knowledge of QA/QC documentation and HSE – work permit system, risk assessment, safelty talks, incident analysis etc
Good knowledge of technical & commercial dossiers for tendering and contracting.
Ability to implement schedule, execute, project procedure and ensure that all deliverables are completed on time, comply to  quality standard in accordance with the project schedules.
Experience in follow-up of material procurement and preparing construction cost estimates for projects.
Ability to perform Civil and Structural analysis / design and technical review of Civil/ Structural deliverables.
APPLY HERE

7) Material Controller

Qualification: Minimum of Bsc /  B.Eng in Civil Engineering or its equivalent

Experience: Minimum of 5 years in Oil and Gas environment as a Material Controller.
Ability to use SAP efficiently.
Good knowledge of stock management system
Ability to ensure that any applicable safety rules are implemented by the staff involved, especially regarding hazardous goods, and that  the equipment preservation procedures is properly and duly implemented throughout the duration of the contract
8) Senior Electrical Engineer Qualification: Minimum of Bsc /  B.Eng in Electrical Engineering Instrumentation or its equivalent
Experience: Minimum of 10 years in Engineering Organization in a similar design position.

Good knowledge of HSE – work permit system, safelty talks, incident analysis etc,
QA/QC documentation and review of Engineering documentation.
Acquaitance with international standards: IEC, API, BS, IEEE, IP Codes, NEC, NACE, ISO, etc.
Working knowledge of Autocad and relevant Engineering design software is an advantage.
Ability to develop design / modify integrated HV and LV electrical systems
Ability to prepare CFT, requisitions for electrical procurements and technical bid evaluation.
APPLY HERE

9) Senior InstrumentationEngineer

Qualification: Minimum of Bsc /  B.Eng in Electrical Engineering Instrumentation or its equivalent

Experience: Minimum of 10 years in an Engineering Organization in a similar design position.

Good knowledge of HSE – work permit system, safelty talks, incident analysis etc,
QA/QC documentation and review of Engineering documentation.
Acquaitance with international standards: IEC, API, BS, IEEE, IP Codes, NEC, NACE, ISO, etc.
Working knowledge of Autocad and relevant Engineering design software is an advantage.
Ability to develop design / modify integrated HV and LV electrical systems
Ability to develop design of integrated instrumentation systems inbcluding Process Control and Shutdown systems.
APPLY HERE

10) Contract Engineer

Qualification: Minimum of Bsc /  B.Eng in Science or Engineering or a degree in business

Experience: Minimum of 5 years in a Multinational company as a contract Engineer
Good knowledge of tender – contract planning & preparation, contract strategy and commercial analysis
APPLY HERE
11) Advert Executives

Qualification: Minimum of Bsc /  Hnd Marketing

Experience: Minimum of 5 years in a reputable organisation
A good knowledge of Microsoft Office Suite, and interner will be a an advantage
APPLY HERE
If you would like to Get email updates of a new Jobs Vacancies,Enter your email address down here :

Note: Activation required. After subscribing, please go to your inbox and click on activation link